Test battery capacity LCD 3.7V 18650/26650/16340/14500/10440/18500 Battery Charger with screen

Charging current

Let charging more flexible!

SD86 features two charging current circuit structure,so that the charge is more flexible, depending on the type and capacity of the battery to determine the size select the charge current, the battery safer, saves time.

When you put the battery into the charging, the system will default to 500mA flash in theLCD screen, within eight seconds selectable 500mA or 1000mA current charge, if you do notmake a choice within eight seconds the system will default to 500mA charging time if To switch the current selection,

the side you want to disconnect the power supply or battery, re-select.

Let charging more secure

Products built-in MCU control circuit, real-time monitoring of the battery charge, and has over-charge protection, over-discharge protection, anti-reverse polarity protection and short circuit protection, so that the battery always maintained in a safe state!

Parameters:
USB port output load voltage: 4.90-5.30V;
Output Current: 1000 m A;
-load current: <1m A;
When the load current 800m A, its port output voltage: 4.80-5.25V;
stop the output protection voltage: 3.0 ± 0.1V;

Input: DC12V / 1.5A
Constant current output: 4.2V …… 500mA / 1000mA * 2
Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V,
NiMH battery 1.42V
Constant voltage charging cut-off current: <100m A
External Power Standby current: <15.0m A;

 

 

 

Fully independent dual-slot design

SD86 charger design uses two completely separate output slot, working independently of each other between the two with each other, the way a button corresponding to the control output, when to charge the battery, the device will automatically determine the battery is a nickel – metal hydride battery or a lithium-ion battery, you can charge at the same time for the lithium-ion battery & NiMH batteries.