Change screen Huawei P20 Pro yourself with this detailed step-by-step guide. Learn how to replace your phone screen safely and efficiently with expert tips.

Change Screen Huawei P20 Pro Yourself: The Ultimate DIY Guide

Replacing a phone screen can seem daunting, but with the right tools and guidance, you can successfully change screen Huawei P20 Pro yourself. This guide will take you through every step, ensuring you complete the task with confidence and efficiency.

Why Change Screen Huawei P20 Pro Yourself?

There are several reasons to change screen Huawei P20 Pro yourself, including:

• Cost savings: Professional repairs can be expensive.
• Convenience: No need to wait for an appointment at a repair shop.
• Skill improvement: Gain technical skills in mobile repair.
• Satisfaction: Successfully repairing your device brings a sense of achievement.

Tools Needed to Change Screen Huawei P20 Pro Yourself

Before starting, gather the necessary tools to change screen Huawei P20 Pro yourself:

• Replacement screen (compatible with Huawei P20 Pro)
• Precision screwdriver set
• Plastic prying tools
• Suction cup
• Heat gun or hairdryer
• Adhesive strips or glue
• Tweezers
• Anti-static wrist strap (optional but recommended)

Step-by-Step Guide to Change Screen Huawei P20 Pro Yourself

Step 1: Power Off the Device

Before you change screen Huawei P20 Pro yourself, turn off your device completely to avoid any potential damage.

Step 2: Remove the Back Cover

Use a heat gun or hairdryer to gently warm the edges of the back cover. Carefully insert a plastic prying tool and slowly lift the back cover. Be patient, as excessive force may break the glass.

Step 3: Disconnect the Battery

Once the back cover is off, locate the battery connector and use a plastic spudger to disconnect it. This prevents electrical issues while replacing the screen.

Step 4: Unscrew the Metal Shield

To access the screen connector, remove the screws holding the metal shield covering the motherboard. Place the screws in a secure container to avoid losing them.

Step 5: Disconnect the Screen Cable

Gently pry off the screen connector using a plastic tool. Be careful not to damage the delicate components surrounding it.

Step 6: Remove the Broken Screen

Use a heat gun to soften the adhesive holding the screen. Insert a plastic prying tool and lift the old screen. Work slowly to prevent cracking or damaging the frame.

Step 7: Clean the Frame

Before installing the new screen, remove any remaining adhesive or glass shards from the frame. A clean surface ensures proper adhesion for the replacement screen.

Step 8: Install the New Screen

Apply adhesive strips or glue to the edges of the frame. Carefully position the new screen and press it into place. Ensure proper alignment before securing it fully.

Step 9: Reconnect the Screen Cable

Reconnect the screen cable and replace the metal shield. Secure the shield with the screws you removed earlier.

Step 10: Reattach the Back Cover

Apply adhesive to the back cover edges and gently press it back onto the device. Use clips or rubber bands to hold it in place until the adhesive sets.

Step 11: Power On and Test

Turn on your device and test the screen for responsiveness, color accuracy, and touch sensitivity. If everything works properly, you have successfully changed the screen on your Huawei P20 Pro yourself.

Common Issues and Troubleshooting

If you encounter issues after you change screen Huawei P20 Pro yourself, here are some troubleshooting steps:

Issue	Possible Cause	Solution
Black screen	Loose screen connector	Reconnect the screen cable securely
Touch not working	Damaged flex cable	Check for any pinched or torn cables
Display flickering	Poor screen quality	Use an original or high-quality replacement screen
Back cover not sealing	Insufficient adhesive	Apply more adhesive and press firmly

Frequently Asked Questions (FAQ)

1. Is it difficult to change screen Huawei P20 Pro yourself?

It requires patience and precision, but with the right tools and guide, it is manageable for most people.

2. How long does it take to replace the screen?

On average, it takes about 1-2 hours, depending on experience.

3. Will replacing the screen affect waterproofing?

Yes, once the device is opened, the waterproofing seal is compromised. Use new adhesive to improve water resistance.

4. Can I use a generic screen replacement?

While cheaper, generic screens may not offer the same quality as original parts. It is best to use a high-quality replacement.

5. What should I do if the new screen does not work?

Check all connections, ensure the screen is compatible, and confirm no internal damage occurred during installation.

Conclusion

If you follow this guide carefully, you can successfully change screen Huawei P20 Pro yourself without professional assistance. Not only will this save money, but it will also give you valuable hands-on experience. Always work patiently and ensure you have the right tools before starting. Happy repairing!